Products

SG2208 Galvo Scanner
The model SG2208 galvo scanner has the good running stability, high positioning accuracy, fast marking speed, strong anti-interference ability, the overall performance of SG2208 has reached the international leading level in this field.
The advantages are as following:
■ Adopted the photoelectric sensors which imported from America and owned the proprietary intellectual property rights.
■ Differential photoelectric sensor for accurate detection of motor rotor position,good linearity,lower drift,high resolution and repeat positioning.
■ Accurate load design for 14 mm mirrors,high accuracy of motor assembly,reasonable structure,very small static friction coefficient and zero offset,all ensured the best dynamic characteristics for the whole system.
■ Drives with advanced detection ability of position and speed,greatly improved the dynamic response performance and scanning speed of the whole system.
■ Design of overload,over-current and reverse connect protection,makes the system running more reliable.
■ The whole system adopted the optimization designing of electromagnetic compatibility with high signal-to-noise ratio and strong anti-interference ability.
■ This scanner system solved the common problems of motor temperature drift,signal interference and zero drift,etc.
SG2208 Technical Parameters
Speed |
||
Marking Speed(1) |
4500mm/s |
|
Writing Speed(2) |
292cps |
|
Step Response Time(1% of full scale) |
510μs |
|
Step Response Time(10% of full scale) |
1540μs |
|
Tracking Error Time |
≤202μs |
|
Precision and Error |
||
Linearity |
99.9% |
|
Repeatability (RMS) |
<8μRad |
|
Gain Error |
<5mRad |
|
Zero Offset |
<5mRad |
|
Long-term Drift Over 8 Hours |
<0.5mRad |
|
Scale Drift |
<40PPM/℃ |
|
Zero Drift |
<15μRad/℃ |
|
Wavelength(3) |
10600nm/1064nm/355nm |
|
Power and Signal |
||
Input Voltage |
±15VDC |
|
Rated Current |
2A |
|
Interface Signal |
Digital |
XY2-100 |
Analog |
±5V |
|
Machinery Scan Angle(4) |
±11° |
|
Working Current, Temperature, Dimension |
||
Working Temperature |
0℃--45℃ |
|
Storage Temperature |
-10℃--60℃ |
|
Aperture |
14mm |
|
Galvanometer Scanner Dimension (LxWxH) |
126x98x105mm |
|
Galvanometer Scanner Weight |
≈1.85Kg |
Note: The above data are tested after 30 min warm-up
(1) With F-theta objective, F=160mm, marking 2mm height single character
(2) With F-theta objective, F=160mm, marking 1mm height single character per second
(3) Special wavelength coating film can be customized
(4)The standard mechanical scanning angle is ±11°,Any special requirement available to be customized.